How to reset my Shark robot vacuum is one of the most common queries by robot vacuum users. Before you try to learn how to reset Shark robot, there are a few things that are equally important to learn. Firstly, you need to know that resetting your device will revert it to the factory default settings. In simple words, if you reset your device, it will restore its original settings and erase all the customized settings from its console.
To learn how to reset Shark robot vacuum, you also need to understand that there are limited circumstances under which you should go for a reset. However, resetting your robot vacuum should be the last resort as you will have to reconfigure your device as a new machine.
So let’s start by discussing The steps to reset your robot vacuum. After that, we will learn under which situations should you consider resetting your Shark robot vacuum to the factory default settings.
How to reset my Shark robot vacuum?
There are two ways through which you can learn how to reset Shark robot vacuum to the factory default settings.
Method 1: Via the Shark Clean app
- Open the Shark Clean app on your device.
- After that, navigate to Settings and then look for the Robot tab.
- Tap on the Factory Reset option.
- Confirm the action by entering the password and the machine will initiate the process.
- Finally, the robot vacuum will be reset to the factory default settings.
Manual reset Process
- Flip your Shark robot vacuum upside down.
- Locate the power button on the robot’s side.
- Press and hold the power button for about 10 seconds, and the Shark robot should power off.
- Wait for about 10 seconds and power it back on. The Shark robot resets and powers on.
Things to keep in mind
Here are some things to keep in mind when resetting your Shark robot vacuum:
- Resetting your robot will erase all of its settings and saved maps.
- You will need to re-add your robot to the Shark Clean app after resetting it.
- If you have any custom cleaning schedules or zones set up, you will need to create them again after resetting your robot.
When should you reset the robot vacuum?
Here are some of the most common circumstances under which you should proceed to learn how to reset Shark robot vacuum.
- Before you sell the Shark robot vacuum to someone else
- When your Shark robot vacuum won’t connect to a WiFi network
- If your device encounters software or firmware issues
- If the Shark robot is not responding to your commands
- When your robot vacuum triggers error codes
- When troubleshooting the Shark robot vacuum issues
How to turn Off Shark robot vacuum?
To turn off a Shark robot vacuum, follow these steps:
- Make sure the power switch on the back of the base is in the ON position.
- Take the robot off the base.
- Press and hold the CLEAN button on the robot for 12 seconds.
- The robot will turn off now.
You can also turn off the robot from the Shark Clean app.
To do this, follow the steps:
- Open the app and tap on the “Settings” icon.
- Now, tap on the “Robot” tab and tap on the “Power” button.
What do I do if I am unable to turn off the Shark vacuum robot?
- If the robot is stuck or blocked, it may not be able to turn off. In this case, you may need to unplug the base or use a manual reset button.
- If the robot is in the middle of cleaning, it will automatically return to the base when it is finished. You can then turn off the robot from the base.
- If you are not using the robot for an extended period of time, you may want to empty the dustbin and clean the filters. This will help to keep the robot running smoothly.
Final thoughts
This post was all about how to reset robot vacuum to the factory default settings. It is super easy to revert your robot vacuum’s settings to the original configuration. However, you must ensure that you only reset your device in certain circumstances that we have already listed above.
This post helped you learn how to reset my Shark robot vacuum to the factory defaults. If you have any doubts or queries, kindly feel free to reach out to us for more help.