Nowadays, Shark Vacuums are the most reliable cleaning gadgets among workaholics. Similarly, this smart cleaning gadget is equipped with the latest technology and smart network configurations. Besides so many advantages, users get stuck with the Shark vacuum not sucking issue sometimes. However, it is very common amongst robotic cleaners.
However, the suction issue with the Shark vacuum generally indicates that the filters are clogged or damaged inside the vacuum. Likewise, this issue may occur when users do not clean the foam and felt filters and it is messed up with debris and other minor particles. Additionally, if you are seeking help with why is my shark vacuum not sucking, must walk through this guide.
Why is Shark Vacuum not sucking?
The primary reason for the vacuum not sucking is its uncleaned filters but a few of the other factors are also responsible, such as:
- Blocked Airways
- Dust cup gets full
- Damaged or clogged hose
- The brush bar is jammed
- Broken or torn vacuum belts
- Vacuum is not charged or dead battery issue
How to fix the Shark Vacuum not sucking issue?
Moreover, you are now aware of the principal causes of why is my shark vacuum not sucking issue. Similarly, it is necessary to fix this issue immediately for the optimal functioning of the vacuum and to maintain its life. Here, share some effective methods according to the reasons to troubleshoot the not sucking issue with your smart vacuum. Let’s have a glance below:
Clean or change the vacuum filters
As discussed above, filters are the primary cause of this issue with the Shark vacuum. So, remove the foam filter first, then pull out the dust cup, and now detach the felt filter. Wash them with lukewarm water and wait till dry. Now, place them in their positions from where you removed them.
Empty the dust cup or the garbage bag
After regular cleaning as scheduled on the vacuum, its dust cup gets full. So, make a habit of checking the dust cup regularly and empty it when it seems to be full. You can do it twice within a week or do routine checkups.
Unclog the vacuum hoses
Shark vacuum generally has two hoses but they can result in loss of suction if they get clogged or damaged. Hence, look after the hose condition, if it is ok, then detach it and clean it properly.
Wipe out the jammed brushes
Check the smart vacuum brushes and rollers in time as during cleaning they get jammed due to hair, minor particles, tangled materials, and debris. So, wipe out the brushes and cut the tangles from the rollers if they can’t be removed.
Check the Shark vacuum belts
The vacuum belt plays a crucial role in its optimal functioning. If the belts get worn or jammed, then it affects the suctioning of the smart cleaning apparatus. Hence, check the belt’s condition and replace it if needed.
Charge the vacuum completely
If the vacuum is not charged fully or there are dead battery issues, then it loses the sucking power. Hence, before cleaning, charge the Shark robotic cleaner properly and check the battery condition. If needed, replace the battery.
Set the vacuum to appreciate the height
If the vacuum height has improper height settings, then the Shark vacuum not sucking issue is common among it. To fix it, set the vacuum to the proper height as per the thickness of the carpet or floor area. The lower height is recommended to move the vacuum freely with great sucking power.
Bottom Line
On the whole, the above-given information is helpful to you to resolve the Shark vacuum not sucking problem easily. Additionally, you walk through the reasons for this issue and can head to the relevant solutions to resolve it. If still this trouble persists, then get in touch with us!